Brass is an alloy of copper and zinc. It is primarily known for its malleability and ductility. Its composition allows for a high degree of lustre.
At Bajaj Alloys, we produce Polishing Grade Brass alloy ingots in a wide range of grades to suit diverse client requirements. Our team's extensive experience ensures that we can offer excellent quality and customer service for requirements of every scale.
Key Features of Our Polishing Grade Brass Alloy Ingots
Fine grain structure | Good surface finish | Excellent fluidity |
Usage
Locks
Hinges
Gears
Bearings
Grille accents
Cleats
Valve stems
Valve guides
Bell flares
Slide mechanisms
Drawer pulls
Knobs
Spindles
Chucks
Spectrometers
Safety levers
Slide releasesers
Grade Range
Grade | Cu | Sn | Pb | Zn | Ni | B | Al | Fe | Mn | As | Si |
SG | 59-62 | 0.1 | 1.10-1.40 | Rem. | 0.09 | 5 - 10 ppm | 0.40 - 0.70 | 0.03 - 0.09 | 0.02 | 0.02 | 0.02 |
Q1 | 59-62 | 0.2 | 1.20-1.80 | Rem. | 0.3 | 5 - 10 ppm | 0.40-0.70 | 0.2 | 0.05 | 0.02 | 0.03 |
Q2 | 58-61 | 0.25 | 1.20-1.80 | Rem. | 0.4 | 5 - 12 ppm | 0.40-0.70 | 0.25 | 0.05 | 0.02 | 0.03 |
Q3 | 57.50-61 | 0.3 | 1.20-1.80 | Rem. | 0.4 | 5 - 12 ppm | 0.40-0.80 | 0.3 | 0.1 | 0.02 | 0.05 |
Q4 | 57.50-61 | 0.35 | 1.20-1.80 | Rem. | 0.5 | 5 - 12 ppm | 0.40-0.80 | 0.35 | 0.2 | 0.02 | 0.05 |
Q5 | 57.5-61 | 0.5 | 1.2.2.5 | Rem. | 0.7-1.0 | 10-20 PPM | 0.7-1.0 | 0.7-1.0 | 0.5 | 0.1 | 0.05 |
DZR | 62-64 | 0.25 | 1 - 1.60 | Rem. | 0.4 | 5 - 12 ppm | 0.50-0.70 | 0.25 | 0.1 | 0.04-0.14 | 0.03 |
